A morning ride from the campground. A rail trail you have wanted to explore for years. An afternoon in a new town with your partner. Taking a recumbent trike on an RV trip gives you another way to experience the places you visit.
A folding recumbent trike can make that plan easier to carry out. Before buying, work through three questions: Where will it travel, will it pass through the opening, and can you load and secure it comfortably?
This guide walks through the measurements and practical checks that matter when choosing a recumbent trike for RV travel, whether you use a motorhome, a fifth wheel with a truck, or a vehicle that carries your trike to the trailhead.
Start with where the trike will travel
Choose the transport location before comparing folded dimensions. Each location has a different opening, usable space, loading height, and method of securing the trike.
| Transport location | Measure first | Also check |
|---|---|---|
| Motorhome or fifth-wheel storage bay | Clear door opening and usable space inside | Obstructions, compartment load limits, access, and suitable securing points |
| SUV or vehicle cargo area | Hatch opening, floor space, and height with seats in the intended position | Wheel arches, hatch closure, luggage, and passenger space |
| Truck bed | Usable bed space and loading height | Wheel wells, bed cover, tailgate, tie-downs, and fifth-wheel hitch clearance where applicable |
| External carrier | Wheelbase, track width, tire size, and complete carried weight | Explicit approval for the trike and exact vehicle or towing configuration |
Include the rest of your travel setup. A truck bed that accommodates a trike when empty may have a very different layout with a fifth-wheel hitch and camping gear in place. Check the loading plan in the configuration you will actually use.
Measure the opening, then the space behind it
Storage volume tells only part of the story. The trike must pass through the door or hatch and move into its final position without interference.
Measure the narrowest clear opening, accounting for latches, hinges, seals, and door stays. Inside, look for shelving, wheel arches, pipes, equipment, and changes in floor height. Leave room for securing the trike and closing the door.
For example: a bay measuring 60 inches long, 32 inches wide, and 28 inches high may appear to accommodate a 58 × 30 × 26-inch folded trike. If the clear door height is only 24 inches, that trike will not pass through upright. The interior measurements alone do not establish that you can load it; the entry angle and actual shape still need to be checked.
Your vehicle measurement worksheet
Copy this table into your notes, or print it and bring your measurements when discussing a trike.
| What to measure | Your measurement | What it helps confirm |
|---|---|---|
| Narrowest clear opening width | ________ inches | Entry clearance for the chosen loading orientation |
| Lowest clear opening height | ________ inches | Clearance for the seat, headrest, pedals, and folded components |
| Usable interior length | ________ inches | Space for the complete folded trike and securing arrangement |
| Usable interior width | ________ inches | Wheel arches, equipment, and space for a second trike |
| Lowest interior height | ________ inches | Clearance beneath shelves, covers, and other obstructions |
| Loading height from the ground | ________ inches | Whether your planned lift or ramp arrangement is practical |
Also record the vehicle's make, model, and year, plus any relevant cargo or compartment load limits. Photos of the opening and interior can help explain a layout that is difficult to describe with numbers alone.
Understand what folds—and what stays the same
Different folding recumbent trikes reduce different dimensions. One design may shorten the frame; another may change its width or height. Ask for the folded length, width, and height of the exact configuration you are considering.
Check what the quoted dimensions include. Does the seat remain attached? What happens to the headrest and rack? Do any wheels need to be removed? Where do pedals, cables, and accessories sit in the transport position?
A folding boom can shorten a trike while leaving its overall width largely unchanged. That can be useful for storage, but a narrow opening still deserves its own measurement.

SC11 development build shown in its riding configuration. Compare riding and folded dimensions when planning your storage space.
Try the complete folding routine
During a demonstration, work through the process you expect to repeat on your travels: fold, load, secure, unload, and return the trike to riding condition. Have the dealer demonstrate the approved sequence and the required locking checks.
Pay attention to how comfortably you can reach the release, what you need to hold while folding, and where removed parts would go. A routine that feels manageable after a ride is an important part of choosing your travel trike.
The Pickens folding boom is designed to be accessed from above and operated without tools. You can see the folding system on our homepage and discuss the process during a demo.

The SC11 development build's folding hinge. A demonstration lets you check release access and the full folding routine for yourself.
Plan for loading weight and reach
Compare the weight you will actually handle, including the equipment that stays attached during loading. An electric trike's motor and battery can make its transport needs different from those of a pedal model.
The same trike can feel very different when moving it into a low cargo floor or lifting it to a higher truck bed. Check your reach, footing, available grip points, and whether another person will regularly be present.
If you plan to use ramps or a carrier, confirm that the equipment is rated for the load and suitable for the trike's three-wheel layout. Ask the supplier to check wheel spacing, ramp position, ground clearance, attachment, and the transition into the vehicle. Use the trike manufacturer's approved handling and securing points.
For an electric trike, follow the specific battery and charger instructions for transport, storage, and charging. Ask whether battery removal is approved for your setup and what weight remains to be handled. Include a suitable battery storage and charging location in your trip plan.
Check external carriers for both trike and RV compatibility
Before choosing an outside carrier, confirm approval for the trike, the vehicle type, and the mounting location. Weight capacity alone does not answer all three questions.
Manufacturer restrictions can be quite specific. For example, Hollywood Racks currently excludes use on RVs, travel trailers, fifth wheels, and towed vehicles for its Sport Rider for E-Bikes with Trike Adapter Kit. Check the current instructions for the exact carrier you are considering rather than assuming a rack that accepts a trike is also approved for your RV arrangement.
Taking two trikes? Plan them together
For couples, transport is a two-trike decision. Measure both machines in their intended transport configurations and include the bags, locks, chargers, and other gear that will travel with them.
Use cardboard or paper to mark their approximate folded footprints on the floor. This is a useful first check for side-by-side or staggered arrangements; follow it with an actual loading demonstration. The seat, wheels, and raised components make each trike more complex than a flat rectangle.
Check which trike loads first, whether each can be secured independently, and whether you can reach the equipment around them. Any stacking arrangement needs an approved support and securing system. Account for the combined load within the vehicle's and compartment's stated limits.
How the Pickens SC11 and SC28E fit into your travel plans
Both Pickens models offer tool-free folding. The useful comparison is how their ride features and transport requirements fit the adventures you have in mind.
| Travel consideration | SC11 | SC28E |
|---|---|---|
| Power | Pedal | Electric assistance |
| Suspension | Rear | Front and rear |
| Folding | Tool-free | Tool-free |
| Currently listed weight | 45 lb | Approximately 75 lb; final production weight to be confirmed |
| Currently listed folded dimensions | 58 × 30 × 26 inches, length × width × height | Confirm the final folded dimensions for your selected configuration before planning vehicle fit |
Specifications reviewed October 30, 2026. Product images show development builds. Production seats are being refined, and the SC28E motor and battery system is undergoing final testing. Verify the current specification and your actual loading configuration before ordering.
Start with the SC11 if you want pedal touring with rear suspension. Explore the SC28E if electric assistance and full suspension suit your routes, while giving its loading weight a place in your transport plan.
Explore Pickens folding recumbent trikes →
For help planning the complete purchase, read How Much Does a Recumbent Trike Cost? and allow for any loading or transport equipment your setup needs.
Bring your travel setup into the buying decision
Before committing, aim to answer these five questions:
- Where will each trike travel, with your other gear in place?
- Will it clear the opening and the full path into that space?
- Can you manage folding, loading, and unloading with the help you expect to have?
- Is the loading and securing equipment approved for the trike and vehicle arrangement?
- Can you repeat the routine comfortably at the end of a ride?
When you request a private demo in Greenville, South Carolina, mention your vehicle and transport plans. Bring your measurements and photos, and ask about arranging a loading demonstration in advance.
The goal is a trike you enjoy riding and feel comfortable taking along. Once the transport plan works, you can spend more of your trip choosing where to explore next.
Book a complimentary Greenville demo →
Folding recumbent trikes for RV travel: frequently asked questions
Will a folding recumbent trike fit in a motorhome storage bay?
It depends on the trike's transport dimensions, the clear door opening, interior obstructions, and the loading path. Measure all of them and arrange an actual fit check where possible. A large bay does not automatically have a large enough door.
Can I carry a recumbent trike in an SUV?
Some vehicle and trike combinations work well. Check the hatch opening, space with the seats positioned as intended, and the loading weight. Include the headrest, rack, pedals, and other parts that remain fitted.
Do I need a rack to travel with a recumbent trike?
That depends on your chosen storage arrangement. A suitable interior space or truck bed may provide another option, provided you have a practical loading method, approved securing points, and adequate load capacity.
Can two folding trikes fit in one vehicle?
Possibly, but each combination needs checking. Plan both folded shapes, the order of loading, room for securing them, and your other luggage. A successful one-trike fit does not establish a two-trike fit.
Is an electric recumbent trike a good choice for RV travel?
It can be, particularly when assistance suits the routes you want to ride. Include the heavier loading weight, battery handling, charging arrangements, and storage requirements in your decision alongside the riding benefits.
Further reading: How to Choose a High-Performance Recumbent Trike. Current model details: SC11 and SC28E. For carrier fit and use restrictions, consult the exact rack manufacturer's current instructions.